Estimating inter-system biases for tightly combined Galileo/BDS/GPS RTK

The overlapping carrier frequencies L1/E1, L5/E5a and B2/E5b from GPS/Galileo/BDS allow inter-system double-differencing of observations, which shows a clear advantage over differencing of the observations of each constellation independently. However, the inter-system biases destroy the integer nature of the inter-system double-differencing ambiguities. Two methods of direct rounding and parameter estimation are used to determine the ISB value. By analyzing data collected from Curtin University from 2015 to 2018, the phase and code inter-system bias (ISB) are related to the receiver type, firmware version and the selected overlapping frequency. Upgrade of receiver firmware version results in changes of ISB values. For example, the upgrade of Javad firmware in Dec, 15, 2017 causes the difference of 0.5 cycles ISB between BDS GEO and non-GEO satellites. By comparing the three dynamic models which include white noise process, random walk process, and random constant in the parameter estimation method, the ISB determined by the random constant model is consistent with the value obtained by the direct rounding method. After the calibration of ISBs, the performances of tightly combined positioning are assessed. The success rate of ambiguity resolution and accuracy of positioning for the tight combination (TC) are significantly improved in comparison with that for the loose combination (LC) over short baselines. For L5/E5a, on which only few satellites can be observed, the maximum increase in success rates of ambiguity resolution can reach 31.7%, i.e., from 54.9% of LC to larger than 86.6% of TC, and the positioning accuracies can even be increased by 0.13 m, i.e., from 0.208 of LC to 0.074 m of TC in East direction for the mix-receiver TRIMBLE NETR9-SEPT POLARX4 in 2018.     

差分卫星定位技术及其在武器系统中的应用

差分卫星定位系统可以极大地提高卫星定位的精度,但也有使用、维护复杂等缺点。针对差分卫星定位的特性,首先阐述了卫星差分定位的基本原理,分析了卫星定位误差源,并介绍了差分定位系统对各种误差的修正情况,然后介绍了差分定位系统的分类、方法及发展,其中详细介绍了在武器系统领域中应用较广的局域差分系统的各种方法及其优缺点;最后,对差分系统的实际应用进行了阐述,并重点探讨了其在进攻性武器及防御性武器领域实现应用的可行性。     

Evaluation of a regional real-time precise positioning system based on GPS/BeiDou observations in Australia

The performance of real-time (RT) precise positioning can be improved by utilizing observations from multiple Global Navigation Satellite Systems (GNSS) instead of one particular system. Since the end of 2012, BeiDou, independently established by China, began to provide operational services for users in the Asia-Pacific regions. In this study, a regional RT precise positioning system is developed to evaluate the performance of GPS/BeiDou observations in Australia in providing high precision positioning services for users. Fixing three hourly updated satellite orbits, RT correction messages are generated and broadcasted by processing RT observation/navigation data streams from the national network of GNSS Continuously Operating Reference Stations in Australia (AUSCORS) at the server side. At the user side, RT PPP is realized by processing RT data streams and the RT correction messages received. RT clock offsets, for which the accuracy reached 0.07 and 0.28?ns for GPS and BeiDou, respectively, can be determined. Based on these corrections, an accuracy of 12.2, 30.0 and 45.6?cm in the North, East and Up directions was achieved for the BeiDou-only solution after 30 min while the GPS-only solution reached 5.1, 15.3 and 15.5?cm for the same components at the same time. A further improvement of 43.7, 36.9 and 45.0 percent in the three directions, respectively, was achieved for the combined GPS/BeiDou solution. After the initialization process, the North, East and Up positioning accuracies were 5.2, 8.1 and 17.8?cm, respectively, for the BeiDou-only solution, while 1.5, 3.0, and 4.7?cm for the GPS-only solution. However, we only noticed a 20.9% improvement in the East direction was obtained for the GPS/BeiDou solution, while no improvements in the other directions were detected. It is expected that such improvements may become bigger with the increasing accuracy of the BeiDou-only solution.     

美国对其GPS采取的国策

从兼顾美国经济利益和国家安全目标、GPS及其增强系统的管理、国家安全及对外政策四个方面综合考察了美国对其GPS所采取的最新国策。     

滚珠丝杠螺距误差补偿法提高数控机床定位精度的研究

在详细论述、对比了实现数控机床滚珠丝杠螺距误差补偿的硬件、软件方法的原理基础上,对滚珠丝杠螺距误差软件补偿法可有效提高数控机床的定位精度进行了试验验证。     

多重直扩信号的快速捕获

多重直扩信号的快速捕获得卫星定位及通信系统研制过程中遇到的一个主要课题，它的实现，不仅可以提高系统的多址能力，而且也是系统实现的必备条件，本文阐明了多重直扩信号的来源以及可被分离的理论依据，给出了多重直扩信号快速捕获的硬件实现方案及部分实验结果，得出了一些重要结论。     

两种提高钻床加工精度和效率的配件装置设计

设计了立式钻床用的两种钻床配件装置：一是可调式二轴头架，可同时钻削两孔，且钻削主轴的轴距可调．应用范围广、效率高。二是孔距定位装置，不需要钻孔模具可一次装夹钻削均匀周布的多孔零件，在不损伤钻床的前提下扩大了钻床的应用范围。提高了加工精度。     

GPS卫星轨道摄动分析

对影响ＧＰＳ卫星轨道的主要摄动量，即地球势函数Ｊ２项对ＧＰＳ卫星轨道的影响作出了定量分析，为我国建立自己的局部测控网获取精密星历提供依据。     

GPS/速率陀螺组合Kalman滤波姿态确定算法研究

建立了GPS／速率陀螺组合姿态估计系统的模型，研究比较了三种典型的Kalman滤波姿态确定算法：状态扩充法、量测量求差法和时变噪声估计跟踪自适应滤波算法。给出了某航天器采用GPS／速率陀螺组合姿态确定的仿真计算结果，并对结果进行了分析。结果表明，与传统Kalman滤波算法比较，时变噪声跟踪自适应滤波算法和量测量求差滤波算法能较好地消除GPS测量中相关时变噪声的影响，提高姿态确定的精度；而且时变噪声跟踪自适应滤波算法能很好地消除由于噪声统计性能的不确定性对Kalman滤波的影响，提高姿态确定系统的性能。